manualshive.com logo in svg

Toyota Land Cruiser Prado 2013, Owner'S Manual, Page: 604 / 736

Share
Download
Toyota Land Cruiser Prado 2013 Owner'S Manual Download Page 604

605

8-2. Steps to take in an emergency

LC150_OM_OM60K29E_(EE)

If the message “DPF FULL SEE OWNER’S MANUAL” appears on the dis-
play (if equipped)

The deposit collected in the filter needs to be regenerated.

To regenerate the filter, the following driving methods are recommended

*

:

By driving continuously (for example, at around 65 km/h [40 mph] for 20 to
30 minutes).

By avoiding short trips, or by driving continuously (leaving the engine run-
ning for long periods of time).

The warning message will disappear when regeneration is complete. How-
ever, if this driving cannot be carried out, or if the message does not disap-
pear even after driving, have the vehicle inspected by any authorized Toyota
dealer or repairer, or another duly qualified and equipped professional imme-
diately.
For details of the DPF system, refer to P. 266.

*

: When driving, pay sufficient attention to weather, road conditions, terrain

and traffic conditions, and drive according to traffic laws.

Summary of Contents for Land Cruiser Prado 2013

































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments