manualshive.com logo in svg

Toyota Land Cruiser Prado 2013, Owner'S Manual, Page: 483 / 736

Share
Download
Toyota Land Cruiser Prado 2013 Owner'S Manual Download Page 483

484

6-3. Using the storage features

LC150_OM_OM60K29E_(EE)

6

Interior features

Using the console box vent (if equipped)

Items unsuitable for the console box

Drinks in unsealed containers

Fragile items, perishables or anything with strong odor

Owner’s manual, electronic devices, CDs, etc. (when using the console box
vent)

When using the console box lid as an armrest

Air from the air conditioner can be distrib-
uted into the console box by opening and
closing the vent.

Open
Close

Slide the console box lid forward or back-
ward as needed. Slide the lid while pulling
up the lever to release the lock.

NOTICE

Do not insert items exceeding the height of the tray. Doing so may prevent
opening and closing of the lid.

1

2

Summary of Contents for Land Cruiser Prado 2013

































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments