manualshive.com logo in svg

Toyota Land Cruiser Prado 2013, Owner'S Manual

The Toyota Land Cruiser Prado 2013 Owner's Manual is a comprehensive guide that provides essential information for owners of this exceptional vehicle. With our user-friendly website, you can easily download this manual for free, ensuring you have all the necessary instructions and insights to optimize your driving experience. Visit manualshive.com now to get your copy.

Share
Download
background image

364

4-5. Using the driving support systems

4

D

riving

LC150_OM_OM60K29E_(EE)

Sounds and vibrations caused by the ABS, brake assist, TRC and VSC/
Trailer Sway Control systems

A sound may be heard from the engine compartment when the engine is
started or just after the vehicle begins to move. This sound does not indicate
that a malfunction has occurred in any of these systems. 

Any of the following conditions may occur when the above systems are
operating. None of these indicates that a malfunction has occurred. 
• Vibrations may be felt through the vehicle body and steering.
• A motor sound may be heard after the vehicle comes to a stop.
• The brake pedal may pulsate slightly after the ABS is activated.
• The brake pedal may move down slightly after the ABS is activated.

Reactivation of the TRC/VSC/Trailer Sway Control systems after turning
off the engine

Turning off the engine after turning off the TRC/VSC/Trailer Sway Control
systems will automatically re-enabled them.

Reactivation of the TRC system linked to vehicle speed

When only the TRC system is turned off, the TRC system will turn on when
vehicle speed increases. However, when both TRC and VSC/Trailer Sway
Control systems are turned off, the systems will not turn on even when vehi-
cle speed increases.

When the brake system operates continuously

The brake actuator may overheat. In this case, the TRC (vehicles other than
2TR-FE engines) will stop operating, a buzzer will sound and the “TRC OFF”
indicator will come on. Refrain from using the system until the “TRC OFF”
indicator turns off. (There is no problem with continuing normal driving.)

Operating conditions of emergency brake signal

When the following three conditions are met, the emergency brake signal will
operate:

The emergency flashers are off.

Actual vehicle speed is over 55 km/h (35 mph).

The brake pedal is depressed in a manner that cause the system to judge
from the vehicle deceleration that this is a sudden braking operation.

Automatic system cancelation of emergency brake signal

The emergency brake signal will turn off in any of the following situations:

The emergency flashers are turned on.

The brake pedal is released.

The system judges from the vehicle deceleration that is not a sudden brak-
ing operation.

If the slip indicator comes on...

It may indicate a malfunction in the TRC or VSC/Trailer Sway Control system.
Consult any authorized Toyota dealer or repairer, or another duly qualified
and equipped professional.

Summary of Contents for Land Cruiser Prado 2013

































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Land Cruiser Prado 2013

Jacob Jensen Electronic Parking Disc II User Manual preview
Electronic Parking Disc II
Brand: Jacob Jensen Pages: 28
Ford 2008 Mustang Quick Reference Manual preview
2008 Mustang
Brand: Ford Pages: 2
Masterack RM470057 Assembly Instructions preview
RM470057
Brand: Masterack Pages: 4
Over Armour Offroad KAW-SX-SDK01 Instructions For Installation And Care preview
KAW-SX-SDK01
Brand: Over Armour Offroad Pages: 5
Toyota 4Runner 2019 Quick Reference Manual preview
4Runner 2019
Brand: Toyota Pages: 52
Alfa Romeo Alfa 147 Quick Start Manual preview
Alfa 147
Brand: Alfa Romeo Pages: 8
EUFAB 16465 Operating Instructions Manual preview
16465
Brand: EUFAB Pages: 12
Kargo Master 8006A Instruction Manual preview
8006A
Brand: Kargo Master Pages: 19
Safe Fleet PRIME DESIGN VBR3-FT31B Manual preview
PRIME DESIGN VBR3-FT31B
Brand: Safe Fleet Pages: 12
Saturn 2007 Ion Owner'S Manual preview
2007 Ion
Brand: Saturn Pages: 440
Phonocar VM 320 Instruction Manual preview
VM 320
Brand: Phonocar Pages: 28
Xforce PR-104 User Manual preview
PR-104
Brand: Xforce Pages: 11
Whispbar K730W Fitting Instructions Manual preview
K730W
Brand: Whispbar Pages: 14
HUSKY LINERS 47954 Installation Instructions preview
47954
Brand: HUSKY LINERS Pages: 4
iOttie HLCRIO138 Manual preview
HLCRIO138
Brand: iOttie Pages: 19
Nav TV MOST-HUR31 Manual preview
MOST-HUR31
Brand: Nav TV Pages: 8
Haltech NEXUS R3 Quick Start Manual preview
NEXUS R3
Brand: Haltech Pages: 13
Panavise Indash 75114-296 Installation Instructions preview
Indash 75114-296
Brand: Panavise Pages: 2

Brands by name

Popular brands

Load more brands