manualshive.com logo in svg

Toyota Land Cruiser Prado 2013, Owner'S Manual, Page: 207 / 736

Share
Download
Toyota Land Cruiser Prado 2013 Owner'S Manual Download Page 207

208

3-5. Opening and closing the windows and moon roof

3

Index

LC150_OM_OM60K29E_(EE)

The moon roof can be operated when

Vehicles without a smart entry & start system

The engine switch is in the “ON” position.

Vehicles with a smart entry & start system

The engine switch is in IGNITION ON mode.

Operating the moon roof after turning the engine off

Vehicles without a smart entry & start system

The moon roof can be operated for approximately 45 seconds after the
engine switch is turned to the “ACC” or “LOCK” position. It cannot, however,
be operated once either front door is opened.

Vehicles with a smart entry & start system

The moon roof can be operated for approximately 45 seconds after the
engine switch is turned to ACCESSORY mode or turned off. It cannot, how-
ever, be operated once either front door is opened.

Jam protection function

If an object is detected between the moon roof and the frame while the moon
roof is closing or tilting down, travel is stopped and the moon roof opens
slightly.

Sunshade

The sunshade can be opened and closed manually. However, the sunshade
will open automatically when the moon roof is opened.

Door lock linked moon roof operation

The moon roof can be opened and closed using the wireless remote control
or key if customized at any authorized Toyota dealer or repairer, or another
duly qualified and equipped professional. (

P. 127, 131)

Moon roof open reminder function

An alarm will sound when the driver’s door is opened with the moon roof not
fully closed and the engine switch off.

Summary of Contents for Land Cruiser Prado 2013

































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments