manualshive.com logo in svg

Toyota Land Cruiser Prado 2013, Owner'S Manual, Page: 322 / 736

Share
Download
Toyota Land Cruiser Prado 2013 Owner'S Manual Download Page 322

323

4-5. Using the driving support systems

LC150_OM_OM60K29E_(EE)

Rear view monitor system

The rear view monitor system will
activate when the shift lever is in
R.

The rear view monitor system will
be deactivated when the shift lever
is in any position other than R.
When the shift lever is shifted to
the R position and any mode but-
ton (such as “MENU”) is pressed,
the rear view monitor system is
canceled, and the screen is
switched to the mode of the button
that was pressed.

: If equipped

The rear view monitor system assists the driver by displaying
guide lines and an image of the view behind the vehicle while
backing up, for example while parking.

The screen illustrations used in this text are intended as examples,
and may differ from the image that is actually displayed on the
screen.

Summary of Contents for Land Cruiser Prado 2013

































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments