Toyota 2002 Sequoia Owner'S Manual Download Page 71

Page: 71 / 329

02_SEQUOIA_U (L/O 0108)

2002 MY SEQUOIA_U (OM34418U)

REMOVING

AND

STORING

THE

COMFORT GUIDE
Pinch the two edges of the seat belt

together so that you can slide them out
of the guide. Pull the guide upward and

slide the guide with the elastic cord

into the pocket on the rear of the seat-
back of the third left seat as shown

above.

CAUTION

To reduce the chance of injury in
case of an accident or a sudden stop

while driving, remove and store the

comfort guide in its pocket when it is
not in use.

The driver and front passenger’s seat

belt pretensioners are designed to be

activated in response to a severe fron-

tal impact.

When the airbag sensor detects the shock

of a severe frontal impact, the front seat
belts are quickly drawn back in by the

retractors so that the belts snugly restrain

the front seat occupants.
The front seat belt pretensioners are acti-

vated  even  with  no  passenger  in  the  front
seat.
Collisions  occurring  at  certain  speeds  and
angles  may  cause  the  seat  belt  preten-

sioners and SRS airbags not to operate

all together.

—Front seat belt

pretensioners

Summary of Contents for 2002 Sequoia










































































































































































































































































































































Search results

Summary of Contents for 2002 Sequoia

Reviews:

Brands by name

Popular brands

Toyota 2002 Sequoia, Owner'S Manual

Search results

Summary of Contents for 2002 Sequoia

Reviews:

Brands by name

Popular brands