Toyota 2002 Sequoia Owner'S Manual Download Page 25

Page: 25 / 329

02_SEQUOIA_U (L/O 0108)

2002 MY SEQUOIA_U (OM34418U)

For vehicles sold in U.S.A.

This device complies with Part 15 of the
FCC Rules. Operation is subject to the

following  two  conditions:
(1)  This  device  may  not  cause  harmful
interference,  and  (2)  this  device  must

accept any interference received, includ-

ing interference that may cause unde-
sired operation.

NOTICE:

This equipment has been tested and

found to comply with the limits for a

Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are

designed to provide reasonable protec-

tion against harmful interference in a
residential installation. This equipment

generates, uses and can radiate radio

frequency energy and, if not installed
and used in accordance with the instruc-

tions, may cause harmful interference to

radio communications. However, there is
no guarantee that interference will not

occur in a particular installation. If this

equipment does cause harmful interfer-
ence to radio or television reception,

which can be determined by turning the

equipment off and on, the user is en-
couraged to try to correct the interfer-

ence by one or more of the following

measures:

Reorient or relocate the receiving an-
tenna.

Increase the separation between the

equipment and receiver.

Connect the equipment into an outlet

on a circuit different from that to
which the receiver is connected.

Consult the dealer or an experienced

radio / TV technician for help.

FCC WARNING:

Changes or modifications not ex-
pressly approved by the party respon-

sible for compliance could void the

user’s authority to operate the equip-
ment.

Summary of Contents for 2002 Sequoia










































































































































































































































































































































Search results

Summary of Contents for 2002 Sequoia

Reviews:

Brands by name

Popular brands

Toyota 2002 Sequoia, Owner'S Manual

Search results

Summary of Contents for 2002 Sequoia

Reviews:

Brands by name

Popular brands