Toyota 2002 Sequoia Owner'S Manual Download Page 108

Page: 108 / 329

02_SEQUOIA_U (L/O 0108)

102

2002 MY SEQUOIA_U (OM34418U)

Cover

Type B

CHILD

RESTRAINT

SYSTEM

INSTALLATION
Type A—

1. Turn up the cover for lower anchor-

ages of the right side position.

2. Widen the clearance between the

seat cushion and seatback a little

and confirm the position of the low-
er anchorages below the tag in the

seat cushion.

3. Latch the hooks of lower straps onto

the anchorages and tighten the lower

straps.

Type B—

1. Turn up the cover for lower anchor-

ages of the right side position.

2. Widen the clearance between the

seat cushion and seatback a little

and confirm the position of the low-

er anchorages below the tag in the
seat cushion.

3. Latch the buckles onto the anchor-

ages.

If your child restraint system has a top

strap, it should be anchored. (For the
installation of the top strap, see “—Using

a top strap” on page 97 in this section.)

For the installation details, refer to the

instruction manual equipped with each

product.

CAUTION

When using the lower anchorages
for the child restraint system, be

sure that there are no irregular ob-

jects around the anchorages or that
the seat belt is not caught.

Push and pull the child restraint

system in different directions to be
sure it is secure. Follow all the

installation instructions provided by

its manufacturer.

When using lower anchorages for a

child restraint system on the third
seats, ensure that the seat is

moved to the rear

−

most position,

with the seatback close to the child
restraint system.

After securing the child restraint
system, never slide or recline the

seat.

Summary of Contents for 2002 Sequoia










































































































































































































































































































































Search results

Summary of Contents for 2002 Sequoia

Reviews:

Brands by name

Popular brands

Toyota 2002 Sequoia, Owner'S Manual

Search results

Summary of Contents for 2002 Sequoia

Reviews:

Brands by name

Popular brands