Toyota 2002 Sequoia Owner'S Manual Download Page 24

Page: 24 / 329

02_SEQUOIA_U (L/O 0108)

2002 MY SEQUOIA_U (OM34418U)

“PANIC”  SWITCH
Pushing  the  “PANIC”  switch  blows  the
horn  intermittently  and  flashes  the

headlights and tail lights.

The “PANIC” switch is used to deter ve-

hicle theft when you witness anyone at-

tempting  to  break  into  or  damage  your
vehicle.
The  alarm  will  last  for  one  minute.  To  stop
alarm  midway,  push  the  “PANIC”  or

“UNLOCK” switch, or unlock any side door

or back door with key. You can also stop
the alarm by turning the ignition key from

“LOCK” to the “ON” position.

The “PANIC” mode does not work when

the  ignition  key  is  in  the  “ON”  position.
This  alarm  function  can  be  disabled.  For
details,  contact  your  Toyota  dealer.

WIRELESS

REMOTE

CONTROL

TRANSMITTER

The wireless remote control transmitter is

an electronic component. Observe the fol-
lowing instructions in order not to cause

damage to the transmitter.

Do not leave the transmitter on places

where the temperature becomes high

such as on the dashboard.

Do not disassemble it.

Avoid knocking it hard against other
objects or dropping it.

Avoid putting it in water.

You can use up to 4 wireless remote con-

trol transmitters for the same vehicle.

Contact your Toyota dealer for detailed
information.

If the wireless remote control transmitter

does not actuate the doors or operate

from a normal distance:

Check for closeness to a radio trans-

mitter such as a radio station or an

airport which can interfere with normal
operation of the transmitter.

The battery may have been consumed.
Check the battery in the transmitter. To

replace the battery, see following

“REPLACING THE BATTERY”.

If you lose your transmitter, contact your

Toyota dealer as soon as possible to

avoid the possibility of theft, or an acci-
dent. (See “If you lose your wireless re-

mote control transmitter” on page 261 in

Section 4.)

Summary of Contents for 2002 Sequoia










































































































































































































































































































































Search results

Summary of Contents for 2002 Sequoia

Reviews:

Brands by name

Popular brands

Toyota 2002 Sequoia, Owner'S Manual

Search results

Summary of Contents for 2002 Sequoia

Reviews:

Brands by name

Popular brands