Toshiba Strata CTX Insight CTX Supervizor'S Manual Download

Page: 97 / 108

Glossary

General Terms

Insight CTX Supervisor Guide 04/03

Long Free

Extension/Agent has been free to take calls for too long.

Long Queue

Too many calls are waiting to be answered in the queue group. Applicable to line
groups, DIDs, DID groups, extension groups and agent groups.

Long Ring
On

Extension/Agent has been ringing for too long.

Long
Unavailable

Extension/Agent has been unavailable to take calls for too long.

Long Wait

Call has been waiting to be answered for too long. Applicable to lines, line groups,
DIDs, DID groups, extension groups and agent groups.

Long Wrap

Extension/Agent has been in wrap up for too long.

Longest Wait

Length of time the longest waiting call has been waiting for.

Maximize
Button

Applicable to windows that are not fully enlarged. When you the maximize button,
the following occurs:

•

The application window enlarges to fill the screen.

•

A data window enlarges to fill the workspace area of the Insight MIS
application window.

Note Maximized windows have no borders.

Message

Extension/Agent has sent a message to the supervisor. In this case the text
associated with the message is displayed on the alarms window.

Minimize
Button

Clicking the Minimize button is the same as choosing Minimize from a Control
menu: The window shrinks to an icon.

MIS

Management Information System.

Table 15

Glossary of Terms (continued)

Term

Definition

Summary of Contents for Strata CTX Insight CTX













































































































Search results

Summary of Contents for Strata CTX Insight CTX

Reviews:

Related manuals for Strata CTX Insight CTX

Brands by name

Popular brands

Toshiba Strata CTX Insight CTX, Supervizor'S Manual

Search results

Summary of Contents for Strata CTX Insight CTX

Reviews:

Related manuals for Strata CTX Insight CTX

Brands by name

Popular brands