Toshiba Strata CTX Insight CTX Supervizor'S Manual Download Page 89

Page: 89 / 108

Alarms

View Alarms

Insight CTX Supervisor Guide 04/03

View Alarms

From the Alarms Window, you can monitor alarms that have been triggered.

Alarms appear in red on the screen (see

“Indication Colors” on page 7

for a detailed

description of screen indicator colors).

➤

Click the Alarms
icon.

From the Alarms window, you can:

•

Click Browse and scroll to view any more alarms.

If more alarms have been triggered than will fit in the window, the most
recent alarms appear in the window.

•

From the Browse mode, you can select an alarm, then click Delete.

This is useful for agent message alarms, which are automatically deleted
from the alarms list.

Summary of Contents for Strata CTX Insight CTX













































































































Search results

Summary of Contents for Strata CTX Insight CTX

Reviews:

Related manuals for Strata CTX Insight CTX

Brands by name

Popular brands

Toshiba Strata CTX Insight CTX, Supervizor'S Manual

Search results

Summary of Contents for Strata CTX Insight CTX

Reviews:

Related manuals for Strata CTX Insight CTX

Brands by name

Popular brands