Toshiba STRATA CIX Programming Manual Download Page 125

Page: 125 / 248

Voice Processing

Mailbox Editor Screens

Strata CIX Voice Mail Programming 01/07

4-39

ice

Pr
oce

ssi
ng

Info

Figure 4-20 Info Tab Screen with Sample Data

Table 4-8

Info Tab Screen Fields (Display only)

IELD

ESCRIPTION

Mailbox Header

See

“Mailbox Header” on page 4-9

for field definitions.

User Statistics

Statistics (creation, saved and connect) for the mailbox.

Box created

Date (mm/dd/yy) and time (hh:mm) this mailbox was originally created. Time is in
military format (24-hour clock).

Box saved

Date (mm/dd/yy) and time (hh:mm) this mailbox was last updated. Time is in military
format (24-hour clock).

Connected secs.

Number of seconds callers have been connected to this mailbox since it was
created.

User secs.

Number of seconds users have been connected to this mailbox since it was created.

Messages

Voice and fax message statistics for the mailbox.

Current

Number of voice messages currently stored.

New

Number of new voice messages and number of seconds for playback of these
stored messages.

Maximum

Maximum number of messages (voice) stored at the same time since the mailbox
was created.

Total

Number of voice messages stored since the mailbox was created.

730

Summary of Contents for STRATA CIX

























































































































































































































































Search results

Summary of Contents for STRATA CIX

Reviews:

Related manuals for STRATA CIX

Brands by name

Popular brands

Toshiba STRATA CIX, Programming Manual

Search results

Summary of Contents for STRATA CIX

Reviews:

Related manuals for STRATA CIX

Brands by name

Popular brands