Toshiba STRATA CIX, Programming Manual

Page: 46 / 248

Voice Mail Configuration
Configuration Wizard
3-6
Strata CIX Voice Mail Programming 01/07
Configuration Wizard
The Configuration Wizard guides you through the voice mail basic operation setup. It includes:
•
Configure the System Database - specifies telephone systems, set up voice lines and answering
methods for AA and designate holidays.
•
Configure User Agents Database
The set of screens are user friendly. If you choose to bypass the screens at log in, you can always
access the Configuration Wizard later through the Configuration Menu.
When the Configuration Wizard program starts, it reads the current configuration of the Stratagy
ES software into memory. As data is entered, the program stores the data until the following
specified intervals:
•
Clicking Next on the Update System Configuration screen.
•
Clicking Create on the Create Classes of Service screen.
•
Clicking Create on the Create Mailboxes screen.
Use Configuration Wizard
1. From the eManager Main menu, click Basic Configuration > Voice Mail Configuration. The
Configuration Wizard screen displays.
2. Follow the prompts on the screens. When the Configuration Wizard process is complete, click
Finish.
User Setup Wizard
The User Setup wizard provides the creation of extensions and mailboxes for telephone users and
typical setup scenarios to associate the extensions and mailboxes.
The following basic options are available on the screen:
•
Create Primary Extension with mailbox
•
Create Primary Extension sharing the same mailbox
•
Create mailboxes and route them to the same extension
•
Create Primary Extensions without mailboxes
•
Create mailboxes without extensions
To access more advanced features, click “More options.” The following selections display:
•
Create Primary Extensions
•
Assign Mailbox Numbers to Extensions
•
Create mailboxes and assign extensions for Auto Attendant
•
Assign User Names to mailboxes and extension LCD screen
Use User Setup
1. From the eManager Main menu, click Basic Configuration > User Setup. The User Setup
screen displays.
2. Click the box in front of the option. A dialog box displays. Fill in the fields and click Create.
3. You can choose another selection or exit the wizard.
Note Options that create Primary Extensions require you to select the type of extension from a
drop-down menu. If you select “Any Type,” the wizard scans all types of station interface
cards for available spots, and on an LIPU card it prefers to create an IPT-L type Primary
Extension.