Toshiba STRATA CIX, Programming Manual

Page: 82 / 248

Voice Mail Configuration
Parameters
3-42
Strata CIX Voice Mail Programming 01/07
sys_rings_no_answer When a mailbox is transferring a call to an extension, it needs to know how
many ringback cycles to wait before signalling a no-answer. This value is
used if the mailbox doesn’t provide its own setting.
Default: 3
sys_security_code_suffix
Defines the suffix used in constructing the default security code. The default
security code for a mailbox number is the mailbox number suffixed with the
value specified in this option.
For example: Assume that you specify the suffix value as 335, the default
security code for Mailbox 200 generated by the system would be 200335.
Default: 997
sys_sendfax_line_group
The name of the notification port group to use when sending fax
transmissions. This applies to the user mode fax features, the SENDFAX
application and IVR programs that send faxes.
By creating a notification port group, then assigning that port group to this
configuration variable, you can limit fax transmissions to the member ports of
that group.
Note
This parameter is not currently supported.
Default: Q1 (enables any line to be used)
sys_short_direct_send What voice mail plays when the Direct Message Mailbox Number (usually
998) is entered followed by the mailbox number.
Possible values:
True: “You entered” and the user’s name recording plays.
False: (default) Mailbox’s current greeting plays (as if received a Ring No
Answer).
sys_short_pause Duration of the short pause in ms.
Default: 500 (.5 secs.)
sys_skip_to_record
Enables a caller to press
#
and skip over a user’s personal greeting and go
directly to recording a message.
Possible values:
True: A caller can press
#
during the user’s mailbox greeting to skip past
the greeting and the prompt to begin recording immediately.
False: Only the greeting is skipped and the prompt plays before recording
begins.
sys_smdi_tcpport Defines the port number that Stratagy SMDI/SMDI+ TCP server is listening
on.This value must match with the IP Port configured in the CIX for IP SMDI.
Default: 1000
sys_smtp_retry_count Defines the maximum number of retries for sending voice messages to the
E-mail server.
Default: 5
sys_smtp_retry_delay Number of milliseconds voice mail waits between retries for
sys_smtp_retry_count.
Default: 60 (milliseconds)
Table 3-12 Parameter Definitions (continued)
Parameter Description