manualshive.com logo in svg

Toshiba STRATA CIX, Programming Manual

The Toshiba STRATA CIX is a cutting-edge telecommunications system, designed to enhance communication and productivity in business environments. Easily navigate its features and functions with the comprehensive User Manual, available for free download from manualshive.com. Maximize the potential of your STRATA CIX with this user-friendly manual.

Share
Download
background image

Unified Messaging (UM)

Feature Description

7-2

Strata CIX Voice Mail Programming    01/07

Feature Description

When installed, the Stratagy ES exists as a peer Simple Message Transport Protocol (SMTP) server 
on a network along with the e-mail server. When new voice messages arrive, the voice mail 
generates an e-mail message that is sent to the e-mail server using the SMTP standard. The actual 
content of the message is dependent on the UM integration scheme that is in use (see 

“Microsoft 

Outlook Integration” on page 7-4 

 and 

“Internet Protocol Integration” on page 7-5 

for details). 

When the user logs in to his/her e-mail account, the voice messages display in that e-mail inbox. 

To communicate with an e-mail server, the voice mail uses Internet Message Access Protocol 
Version 4 (IMAP4), SMTP, or POP3 Internet standards. By integrating solely on the principles of 
these standards, the voice mail can incorporate a UM solution with any e-mail server that supports 
these same standards. In this day and age of the Internet, most e-mail server products, from 
Microsoft Exchange to inexpensive shareware software, is compliant to these Internet standards.

Voice File Compression

Voice messages are transported to the e-mail client as .wav files. A .wav file consists of a voice file 
with a header attachment that defines the voice compression algorithm that was used to record the 
voice file. 

Unified Messaging sends voice files with the same low frequency compression algorithm that is 
used to store voice messages on the system’s hard drive. By default this compression algorithm is 
Adaptive Delta Pulse Code Modulation (ADPCM) 32K or 4 bit x 8 kilohertz. 

Using a low compression algorithm means that the bandwidth of the network should not be 
adversely affected by the periodic transport of these .wav files. For example, a voice message 
lasting one minute, which is double the time of an average message, creates a voice file just under 
250K. Voice File compression can be changed using the 

sys_msg_recording_audio_type

 

parameter.

UM Synchronization

UM synchronization uses IMAP4 to provide users a synchronized message set (of voice messages) 
both in their SES mailbox and in the e-mail server mailbox. When new voice messages are received, 
Stratagy sends the referenced message (or the WAV file with the Internet Protocol Integration 
method for UM) via SMTP to the e-mail server with a special identifier in the message. 

This feature must be programmed in the Mailbox Editor, Unified Messaging tab screen.

IMAP4

When you select IMAP4 on the Unified Messaging screen, the following occurs:

•

If a user logs into his/her voice mail via the TUI and deletes a message, Stratagy uses IMAP to 
identify and delete the message in the e-mail server. This also deletes the messages from the 
user’s e-mail client inbox screen if the messages were displayed on it at the time.

If a user logs into his/her voice mail via the TUI and listens to a message in the NEW folder, the 
corresponding message in the e-mail server or e-mail client inbox is flagged as “read” or 
“seen.” This includes messages that are marked by Stratagy as Pending and kept in the New 
Message folder. Messages marked as Deleted are not actually deleted until the user logs out 
from his or her UM-enabled mailbox.

Summary of Contents for STRATA CIX

























































































































































































































































Reviews:

No comments

Related manuals for STRATA CIX

SAMCHULLY SD Instruction Manual preview
SD
Brand: SAMCHULLY Pages: 48
Gallagher B10 Manual preview
B10
Brand: Gallagher Pages: 6
Keiser M SERIES Manual preview
M SERIES
Brand: Keiser Pages: 82
Keiser M SERIES Calibration Instruction preview
M SERIES
Brand: Keiser Pages: 4
Panlux MODENA Instructions preview
MODENA
Brand: Panlux Pages: 2
Raymarine H6 System Installation Manual preview
H6
Brand: Raymarine Pages: 124
Raymarine H6 Owner'S Manual preview
H6
Brand: Raymarine Pages: 192
Land Pride RTA10 Series Operator'S Manual preview
RTA10 Series
Brand: Land Pride Pages: 36
Land Pride Skid Steer Rakes SR2672 Specifications & Capacities preview
Skid Steer Rakes SR2672
Brand: Land Pride Pages: 2
Land Pride RCM5020 Series Specifications & Capacities preview
RCM5020 Series
Brand: Land Pride Pages: 2
Land Pride Disc Harrows DH3510 Specifications & Capacities preview
Disc Harrows DH3510
Brand: Land Pride Pages: 2
Land Pride 55 Series User Manual preview
55 Series
Brand: Land Pride Pages: 4
Land Pride OS1548 Assembly Instructions preview
OS1548
Brand: Land Pride Pages: 4
Land Pride Straw Crimper CR2572 Parts Manual preview
Straw Crimper CR2572
Brand: Land Pride Pages: 16
Oakworks Medical PG Series Instruction & Maintenance Manual preview
PG Series
Brand: Oakworks Medical Pages: 28
Rainin Instrument P-10 Manual preview
P-10
Brand: Rainin Instrument Pages: 16
Valcom V-9972 Quick Start Manual preview
V-9972
Brand: Valcom Pages: 6
Vaisala HUMICAP HMP4 User Manual preview
HUMICAP HMP4
Brand: Vaisala Pages: 60

Brands by name

Popular brands

Load more brands