Toshiba e-studio 167, Service Manual, Page: 232 / 268

e-STUDIO167/207/237 © 2007 - 2008 TOSHIBA TEC CORPORATION All rights reserved
FUSER / EXIT UNIT
13 - 16
[E] Separation finger
Note:
When installing the guide, secure the spring
to the hook of the fuser unit and the other
end of the spring to the guide.
Fig. 13-18
(1) Take off the fuser roller unit.
P.13-12 "[B] Pressure roller unit / Fuser
roller unit"
(2) Remove 3 screws and take off the sub guide.
Fig. 13-19
(3) Remove 5 springs from the hooks.
Fig. 13-20
Spring Hook Guide
Sub guide
Fuser roller unit
Spring