TIM SmartVap D, Instructions For Use Manual

Page: 94 / 132

8 Alarm messages, notifications and malfunctions
94 SmartVap Vaporizer SW 1.n, Instructions for use (en-US)
Alarm Pri-
ority
ID Cause Remedial action
Dispensing
DES stopped
(interlock) ! ! ! 02 The vaporizer has been
blocked by another vapor-
izer (interlock).
(Only with SmartVap D)

To continue dispensing
anaesthetic agent, un-
block the vaporizer (in-
terlock) and restart the
dispensing of anaes-
thetic agent.

Or press the turning
knob to confirm the
stopping of dispensing
of anaesthetic agent.
Dispensing
DES stopped
(mech. lock) ! ! ! 01 The mechanical lock for
the vaporizer was
opened.

To continue dispensing
anaesthetic agent, lock
the vaporizer onto the
connector panel of the
anaesthesia workstation
and restart the dispens-
ing of anaesthetic
agent.

Or press the turning
knob to confirm the
stopping of dispensing
of anaesthetic agent.
Fill level low ! 16 The level in the reservoir
is low. Fill the vaporizer reservoir.
Fill level low ! ! 10 The level in the reservoir
is very low. Fill the vaporizer reservoir.
Fill opening
open ! 15 The cover flap of the fill
opening has been open
for 5 minutes. Close the cover flap of the
fill opening.
Fresh gas flow
too high ! 14 The fresh gas flow is
above the specified
range. Ensure that the fresh gas
flow of the anaesthesia
workstation is within the
specified range of between
0.2 and 15 L/min.