TIM SmartVap D, Instructions For Use Manual

Page: 111 / 132

11 Service
SmartVap Vaporizer SW 1.n, Instructions for use (en-US) 111
11.2.3 Safety check
The safety check consists of four parts:

Visual inspection

Safety function test

Check of dispensing accuracy

Electrical safety test
The results of all parts of the safety check are documented in the product record and sent
to the manufacturer. The product record can be downloaded from the manufacturer’s web-
site:
A Conducting a visual inspection
The visual inspection checks the following items:

The accompanying instructions for use are available and conform to the product
version.

The safety-related labels/markings are complete and legible.

The following vaporizer parts do not show any visible damage:
o
Mechanical lock (locking knob, locking pin)
o
Interlock pins (SmartVap S) and openings (SmartVap D)
o
Fresh gas flow inlet/outlet

The housing and accessories (power supply unit and power cable) show no dam-
age. (The power supply unit and power cable are original manufacturer parts.)
B Conducting a safety function test
In this test, all safety-related functions of the vaporizer are self-tested by the device.
To conduct the safety function test, fill the vaporizer and turn it on. The vaporizer conducts
a device test.
The safety function test is a "pass" if the vaporizer concludes the device test with the mes-
sage “Device test successful”.