TIM SmartVap D, Instructions For Use Manual

Page: 79 / 132

7 Menu mode
SmartVap Vaporizer SW 1.n, Instructions for use (en-US) 79
If the memory on the USB drive is insufficient or if no USB drive is recognized, this will
be displayed by the corresponding USB symbol (2) and a message (3) will also be
shown. The Export (4) button cannot be activated in this case.
C Start downloading the data by briefly pressing the turning knob (5).
► The data is downloaded.
The downloading will be displayed by the corresponding USB symbol (2) and a mes-
sage (3) will also be shown. If the USB drive is removed while downloading is taking
place, the vaporizer will abort the process.
D Close the dialog by tapping on the Back (6) button.
► The menu's
Options dialog is displayed.
Please note: If the Data export dialog is exited during downloading, and the dispensing
of Desflurane is initiated or the vaporizer is placed in Standby mode, the
vaporizer will abort the process. The next time that the
Data export dialog
is opened, the previously aborted downloading process will be indicated by
a corresponding USB symbol (2) and a message (3) will also be shown.
i
Additional information about the USB symbols can be found in chapter 3.6.2.
i
Additional information about the notifications in dialogs can be found in chapter 8.4.