TIM SmartVap D Instructions For Use Manual Download Page 61

Page: 61 / 132

5 Operation

SmartVap Vaporizer SW 1.n, Instructions for use (en-US)

5.9.3

Ending Standby mode

To end Standby mode, briefly press the turning knob. The vaporizer conducts a device test
and is then ready for use.

Additional information about the device test can be found in chapter 5.4.

5.10 Removing the vaporizer from an anaesthesia workstation

Prerequisite:

The vaporizer is in Standby mode.

Turn the locking knob to the right (in a counterclockwise direction).

► The locking knob is in horizontal position. The vaporizer is no longer locked.

Carefully lift the vaporizer vertically, using both hands.

Disconnect the vaporizer from the mains power supply.

Summary of Contents for SmartVap D





































































































































Search results

Summary of Contents for SmartVap D

Reviews:

Related manuals for SmartVap D

Brands by name

Popular brands

TIM SmartVap D, Instructions For Use Manual

Search results

Summary of Contents for SmartVap D

Reviews:

Related manuals for SmartVap D

Brands by name

Popular brands