TIM SmartVap D, Instructions For Use Manual

Page: 15 / 132

2 Safety
SmartVap Vaporizer SW 1.n, Instructions for use (en-US) 15
The use of anaesthesia workstations that do not comply with these standards could result
in risk to the patient.
Only use anaesthesia workstations that comply with EN ISO 80601-2-13.
Please note: The current declaration of compatibility can be downloaded from the web-
site of the manufacturer Technologie Institut Medizin GmbH (TIM).
If the vaporizer is used together with an anaesthesia workstation that is not connected to
an anaesthesia gas scavenging system in accordance with EN ISO 80601-2-13, this may
pose a risk to persons.
Only use the vaporizer with an anaesthesia workstation that is connected to an an-
aesthesia gas scavenging system in accordance with EN ISO 80601-2-13.
If the instructions for use of the connected devices or device combinations are not followed
before putting the devices into service, this may result in risk to the patient and other per-
sons or damage to the device.
Always follow closely the instructions for use of all connected devices or device com-
binations, before putting the devices into service.
2.1.8 Before every use
Parts of the vaporizer may be damaged during processing, or by wear and tear, or due to
incorrect storage, and this may affect its function. This could result in risk to the patient.
Before operation, please ensure that the following conditions are met:
All parts of the vaporizer are free of cracks and sharp edges.
All cables are undamaged and correctly connected.
Conduct the device test. This ensures that all safety-relevant functions and compo-
nents work correctly.
A vaporizer that clearly does not work properly must be replaced.