TIM SmartVap D, Instructions For Use Manual

Page: 93 / 132

8 Alarm messages, notifications and malfunctions
SmartVap Vaporizer SW 1.n, Instructions for use (en-US) 93
Alarm Pri-
ority
ID Cause Remedial action
Dispensing
DES paused
(no FGF) ! ! ! 04 The vaporizer cannot de-
tect any fresh gas flow.

Check the position of
the vaporizer on the
connector panel.

Check the mechanical
lock of the vaporizer.

Check the fresh gas
flow of the anaesthesia
workstation.
Dispensing
DES paused
(reservoir
empty) ! ! ! 03 The vaporizer cannot dis-
pense any more anaes-
thetic agent. The reservoir
is empty.

Fill the vaporizer reser-
voir.

Or end the dispensing
of anaesthetic agent.
Dispensing
DES reduced ! 13 The quantity of the anaes-
thetic agent dispensed is
lower than the set value
(this may occur when fill-
ing the reservoir or during
battery operation, for ex-
ample).

If the vaporizer is cur-
rently being filled, stop
filling.

Or reduce the dispens-
ing quantity of anaes-
thetic agent.

Or reduce the fresh gas
flow.
Dispensing
DES reduced ! ! 07 The quantity of the anaes-
thetic agent dispensed
has been lower than the
set value for several
measurement cycles (this
may occur when filling the
reservoir or during battery
operation, for example).

If the vaporizer is cur-
rently being filled, stop
filling.

Or reduce the dispens-
ing quantity of anaes-
thetic agent.

Or reduce the fresh gas
flow.
Dispensing
DES reduced
(FGF high) ! ! 08 The fresh gas flow is
above the specified
range. Reduce the fresh gas flow
of the anaesthesia work-
station to a value between
0.2 and 15 L/min.