Thermo King TriPac Envidia, Installation Manual

Page: 74 / 80

72
Step 2 – Procedures (continued)
Alarms
ALARM CODE CHART
CODE NUMBER CODE TYPE CODE DESCRIPTION
02 CHECK
Evaporator Coil Sensor
03 CHECK
Return Air Sensor
05 CHECK Ambient Air Sensor
10 SHUTDOWN
High Discharge Pressure
11 CHECK Unit Controlling on Alternate Sensor
12 SHUTDOWN Sensor Shutdown
23 SHUTDOWN
Cooling Cycle Fault
49 CHECK Cab Temperature Sensor
54 SHUTDOWN Test Mode Timeou t
61 LOG CHECK
SHUTDOWN
Low Battery Voltage
70 LOG Hourmeter Failure
155 CHECK Lost CAN Communication
180
CHECK,
SHUTDOWN
Compressor Fault
39. Select Alarm tab.
40. Record any alarms shown. Refer to the Alarm Code Chart to diagnose and repair all alarm conditions.
41. Clear all alarms.
This completes the TriPac Envidia operation checkout procedures.
Exiting Envidia Service Tool
42. Close the Envidia Service Tool on the computer.
43. Press the Mode Selection knob on the HMI for approximately three seconds to turn the TriPac Envidia system OFF.
44. Disconnect the USB Adapter Harness from the PC.
For further diagnostic procedures see TriPac Envidia Maintenance Manual (TK 56458-19-MM) and TriPac Envidia
Operation and Diagnostic Manual (TK 56464-19-OD).