![background image](http://html1.mh-extra.com/html/thermo-king/tripac-envidia/tripac-envidia_installation-manual_1104402020.webp)
18
Required Tools and Additional Supplies
Tools
1. Typical Mechanics Tools
2. Floor Jack or Motorcycle/ATV Lift
3. Drill Motor
4. Drill Bit Set
5. 7/8" dia. or 1" Step Reamer (for evaporator drain and controller holes)
6. Hole Saws
a. 1" dia. (for fuel tank pickup tube)
b. 2-1/2" dia. (for heater inlet/outlet louver)
c. 2" dia. (access hole for evaporator hoses and electrical wiring)
d. 3” dia. (optional size access hole)
e. 4-1/4" dia. (mounting A/C louvers, routing A/C ducts through and heater mounting hole)
7. Reciprocating Saw (return air opening)
8. 1/2" Wrench
9. Level
10. Tape Measure
11. Utility Knife
12. Caulk Gun
13. Digital Meter (204-1079)
14. Refrigerant Leak Detector (204-712)
15. Hose Fitting Tool (204-1045)
16. Hose Cutting Tool (204-677)
17. Heater Priming Harness (204-1144)
18. Shop Vacuum
19. R-134a Gauge Manifold with automotive connectors
20. Vacuum Pump (204-713)
21. Micron Gauge (204-720)
22. Accurate Refrigerant Scale
23. AGM Battery Tester (204-1959)
24. Heavy Duty AGM Battery Charger (204-1923)
25. Laptop Computer (IBM Compatible) with Microsoft Internet Explorer 10.0 or higher installed.
26. USB Adapter Cable (204-2000)
Supplies (as required)
1. RTV Silicone sealant
2. Sealer Tape (203-391)
3. Alkyl Benzene Refrigerant Oil (670404TKA for lubricating hose fittings and O-rings)
4. Refrigerant 134a
5. Return air wall louver (approximately 11” x 10”)
6. Mounting Clamps #24 and #32 (to secure cables and hoses)
7. Band Wraps (assorted sizes and lengths)
8. Upholstery cleaner
9. Cardboard or blankets (to protect truck interior)
10. Fiberglass repair Kit (only used for fiberglass and wood composite floor)
Summary of Contents for TriPac Envidia
