Thermo King TriPac Envidia, Installation Manual

Page: 35 / 80

33
Fabricating Refrigeration Hoses (continued)
Nose of the pliers should be firmly seated under the assembly bump and lock latch.
If the pliers are not kept square during closing the clip, the clasp may have an offset. Use the piers to correct the clasp
alignment.
CAUTION: TK 2000 Speedy Clip System components should not be reused. Failure to follow these instructions and/or the
use of TK 2000 Speedy Clip System hose with fittings supplied by other manufactures could result in sudden or
unintended escape of refrigerant gases. Personal injury and/or violations of EPA regulations may occur as a
consequence.
NOTE: Thermo King recommends adherence to all guidelines, including EPA guidelines concerning the service of
refrigerant systems.
Correct
Incorrect