Thermo King T-1000R, Maintenance Manual

Page: 17 / 282

Specifications 3-3
Engine Coolant Type ELC (Extended Life Coolant), which is “RED”
Use a 50/50 concentration of any of the following
equivalents:
Chevron Dex-Cool
Texaco ELC
Havoline Dex-Cool®
Havoline XLC for Europe
Shell Dexcool®
Shell Rotella
Saturn/General Motors Dex-Cool®
Caterpillar ELC
Detroit Diesel POWERCOOL® Plus
CAUTION: Do not add “GREEN” or “BLUE-GREEN”
conventional coolant to cooling systems using “RED”
Extended Life Coolant. In an emergency deionized
water can be used but must be replaced with the
correct coolant as soon as possible.
Coolant System Capacity T-1200R, T-1000R
Coolant System Capacity T-800R, T-600R
Coolant System Capacity T-500R
Coolant System Capacity T-Dairy
Coolant System Capacity UT-Series
6.2 liters with coolant expansion tank
5.7 liters with coolant expansion tank
5.7 liters with coolant expansion tank
5.7 liters with coolant expansion tank
5.2 liters with coolant expansion tank
Coolant Expansion Tank Cap Pressure
T-Series
UT-Series
103 kPa (15 psig)
48kPa (7 psig)
BELT TENSION
Belt Tension No.
on TK Gauge
P/N 204-427
Frequency Gauge P/N
204-1903
New (Hz) Run-In (Hz)
Water Pump Belt
40
Engine/Electric Motor (Jackshaft)
T-500R/T-Dairy
T-600R, T-800R, T-1000R, T-1200R
T-800R, T-1000R, T-1200R SPECTRUM
UT-Series
65-75
79
69
59 70-75
55-60
45-50
Electric Motor (Jackshaft)/Compressor
T-500R/T-Dairy
UT-Series 65-75
146 146
T-1000R
T-1200R
T1000R SPECTRUM
T1200R SPECTRUM
See page 9-33 thru’ 9-35 for details
Alternator (UT-Series only)
45-55
Note: Refer to relevant chapter for correct belt tension procedure.
Note: Most recent models of T-Series Units now generally use plates for setting the tension - see Chapter 9 for
correct belt tension procedures.
ENGINE (CONTINUED)