Thermador PRG486JDG/01, Service Manual, Page: 84 / 91

Service Manual for the Thermador Pro Grand Next Generation 48-Inch Natural Gas and LP Gas Ranges, Models:
PRG486JDG/01, PRL486JDG/01
58300000159722_ARA_EN_D
Page 85 of 92
5. Remove oven door (see Removing the Door, page 70).
6. Remove all the oven racks.
7. Remove kick panel (see Kick Panel Removal and Replacement ,
page 91).
8. Remove and retain the two screws on the bottom cover that
secure it to the oven cavity and reflector, and then remove the
cover (see Figure 135).
Figure 135: Bottom Cover of Small Cavity
1 Screws (2) on bottom cover of oven cavity
Sharp Components
Wear gloves and be careful when handling sharp bake burner
components
9. Remove the reflector from the burner box (see Figure 136).
10. From under the oven cavity, remove and retain the two screws
that secure the bracket onto the exterior of the burner box, and
then remove the bracket (see Figure 137 and Figure 138,
page 86).
Figure 136: Reflector Installed (Left) and Removed (Right)
Figure 137: Removing Bracket Screws