Service Manual for the Thermador Pro Grand Next Generation 48-Inch Natural Gas and LP Gas Ranges, Models:
PRG486JDG/01, PRL486JDG/01
58300000159722_ARA_EN_D
Page 80 of 92
8. Remove the reflector from the burner box (see Figure 127).
Figure 127: Reflector
9. Remove and retain the two screws on the straight bracket, and
then remove the straight bracket. Do not remove the U-shaped
bracket from the burner box (see Figure 128).
10. Remove and retain the two screws holding the two ends of the
burner onto the burner box chassis (see Figure 124, page 79).
Figure 128: Bake Burner Brackets
1
U-shaped bracket (remains fixed on burner box)
2
Straight bracket with two screws
11. Lift the burner up slightly and out from the burner box, while you
carefully pull the HSI wire harness out into the burner box (see
Figure 129, page 81).
12. Remove and retain the two screws to detach the HSI from the HSI
retaining bracket (you can leave the HSI bracket attached to the
bake burner if you are replacing just the HSI). See Figure 129,
page 81.
13. See
on
page
and replace the
HSI if needed.