Thermador PRG486JDG/01, Service Manual, Page: 80 / 91

Service Manual for the Thermador Pro Grand Next Generation 48-Inch Natural Gas and LP Gas Ranges, Models:
PRG486JDG/01, PRL486JDG/01
58300000159722_ARA_EN_D
Page 81 of 92
Figure 129: Removing the Bake Burner
1 Screws (2) securing HSI to HSI retaining bracket
2 Wire connectors (2) on bake burner HSI harness
Gas Leak Testing
With electrical power off, carefully check for gas leaks at each gas
component that was removed, replaced, or otherwise serviced using a
gas leak detector (electronic leak detectors are highly recommended)
or bubble test.
6.9.7.2 Bake Burner for Large Oven – Removal and
Replacement
For replacing the bake burner, access is from the front and back
of the range.
Figure 130: Bake Burner for Large Oven
1 Air shutter (adjustment screw not shown)
1. Perform steps 1–11 of the Bake Burner HSI for Large Oven –
Removal and Replacement procedure, page 79.
2. Remove and retain the two screws securing the HSI retaining
bracket onto the bake burner, and then remove the HSI retaining
bracket (you can leave the HSI inside of the HSI retaining bracket
if you are not replacing it).