Thermador PRG486JDG/01, Service Manual, Page: 55 / 91

Service Manual for the Thermador Pro Grand Next Generation 48-Inch Natural Gas and LP Gas Ranges, Models:
PRG486JDG/01, PRL486JDG/01
58300000159722_ARA_EN_D
Page 56 of 92
7. Remove and retain the two T-20 screws under the front control
panel (see Figure 78).
8. Gently lift the latch out, and replace if necessary.
Figure 78: Door Latch, Screws, and Plunger Switch
1 T-20 screws (2)
2 Door latch
3 Plunger switch
9. Detach the spade wire connectors from the latch and the white
plastic piggyback wire connector on the door latch’s microswitch
(see Figure 79 and Figure 80, page 57).
NOTE: It is always recommended to label and tag all wires, wire
connectors, and harnesses prior to disconnecting them so as to
correctly identify their connections/locations when reassembling.
Alternatively, you can photograph prior to disconnecting (for
example, with your mobile phone).
Figure 79: Door Latch
1 Plunger switch
2 Wire connectors on door latch
3 Microswitch
10. Replace the door latch if needed.
NOTE: If replacing the plunger switch, it must be done before the
door latch is reinstalled (see Plunger Switch Removal and
Replacement, page 57 ).