Service Manual for the Thermador Pro Grand Next Generation 48-Inch Natural Gas and LP Gas Ranges, Models:
PRG486JDG/01, PRL486JDG/01
58300000159722_ARA_EN_D
Page 73 of 92
5. Wearing gloves, rotate the nut clockwise, and then remove the
nut, convection fan and shim ring (see Figure 111).
Figure 111: Fan, Nut, Shim Ring and Washer
1
Shim ring and washer
2
Fan
3
Nut
6. Remove the six screws on the rear cover shield (see Figure 112),
and pull the rear cover shield (with motor assembly attached)
forward, through the oven cavity. See Figure 113, page 73.
Figure 112: Rear Cover Shield
1
Screw locations (6)
7. Label, and then detach the two spade connectors on the motor
terminals (see Figure 113).
Figure 113: Convection Motor Assembly Removed
1
Spade connectors (2)
8. Remove and retain the four screws from the rear cover shield that
are attached to the bracket, and then remove the bracket (see
Figure 114, page 74).
9. Wearing gloves, remove the fiberglass insulation from the bracket
(see Figure 115, page 74).
10. Remove and retain the three screws securing the bracket onto the
motor, and then remove the bracket (see Figure 116 and
Figure 117, page 74).