Service Manual for the Thermador Pro Grand Next Generation 48-Inch Natural Gas and LP Gas Ranges, Models:
PRG486JDG/01, PRL486JDG/01
58300000159722_ARA_EN_D
Page 59 of 92
Figure 85: Removing the Thermostat Bulb from Retaining Bracket
1
Retaining bracket
2
Thermostat bulb
6.7.22 Oven Display Module and Light Switch – Removal and
Replacement
This procedure is for both ovens. To replace an oven light switch
and/or display module, access is from the top of the range.
Be sure to check QuickFinder for relevant information, documentation,
and the correct part number when replacing this component.
Figure 86: Oven Display Module
1. Follow all safety precautions and steps in Preparing the Range for
Servicing, page 22.
2. Follow all steps in
Accessing Components under the Maintop,
3. Rotate the oven light switch bezel counter-clockwise to remove it
(see Figure 87, page 60).
HINT:
If the bezel does not rotate easily by hand, use a wrench
with protective cloth to avoid scratching, or a strap wrench. See
Figure 87, page 60.