Themis RES-32DCX, Installation Manual

Page: 94 / 146

C—BIOS Setup Utility
Advanced Setup
C-15
Themis Computer
C.4.6 X Advanced Processor Options
Access the submenu to make changes to the following settings.
C.4.6.1 CPU Speed
This is a display that indicates the speed of the installed processor.
C.4.6.2 Frequency Ratio (Only when supported by the CPU)
The feature allows the user to set the internal frequency multiplier for the CPU. The
options are:
Default , x12, x13, x14, x15, x16, x17 and x18.
C.4.6.3 Hyper-Threading (Only when supported by the CPU)
Set to Enabled to use the Hyper-Threading Technology, which will result in
increased CPU performance. The options are Disabled and
Enabled .
C.4.6.4 Core-Multi-Processing (Only when supported by the CPU)
Set to Enabled to use a processor's Second Core and beyond. (Please refer to Intel's
web site for more information.) The options are Disabled and
Enabled .
C.4.6.5 Machine Checking (Only when supported by the CPU)
Set to Enabled to activate the function of Machine Checking and allow the CPU to
detect and report hardware (machine) errors via a set of model-specific registers
(MSRs). The options are Disabled and
Enabled .
C.4.6.6 Thermal Management 2 (Only when supported by the CPU)
Set to Enabled to use Thermal Management 2 (TM2), which will lower CPU voltage
and frequency when the CPU temperature reaches a predefined overheat threshold.
Set to
Disabled to use Thermal Manager 1 (TM1), allowing CPU clocking to be reg-
ulated via CPU Internal Clock modulation when the CPU temperature reaches the
overheat threshold.
C.4.6.7 C1 Enhanced Mode (Only when supported by the CPU)
Set to Enabled to enable Enhanced Halt State to lower CPU voltage/frequency to
prevent overheat. The options are Enabled and
Disabled .
[Please refer to the Intel website for detailed information.]