Themis RES-32DCX Installation Manual Download Page 34

Page: 34 / 146

1-5

Themis Computer

Overview and Specifications

Overview

Integrated SCSI

(no external I/O)

Dual-channel Ultra320 support for internal SCSI hard-disk drives through

cabled on-board headers (

system default

)

Supports Adaptec zero-channel RAID (ZCR) in PCI-X slot 1

Serial ATA

(no external I/O)

Dual-channel support for internal SATA II drives through cabled on-board

headers

Integrated I/O

2 serial ports (9-pin)—COM1 (standard) and COM2 (

optional

)

1 parallel port (25-pin, EPP/ECP/SPP/BPP)

6 USB 2.0 ports (4 from rear I/O panel, 2 from on-board headers

)

1 PS/2 keyboard port (DIN-6) and 1 PS/2 mouse port (DIN-6)

1 Intel 82563 Gigabit Ethernet controller (1 or 2 LAN ports, LAN1/LAN2)

1 audio line in, 1 audio line out, 1 audio microphone in

1 Adaptec 7902 Ultra 320 zero-channel SCSI RAID controller

Operating temperature

0°C to 50°C

Shock endurance

25G @ 40-msec duration

Dimensions

5.25” (3RU) high, 17” (43.2 cm) wide (19”/48.3 cm with mounting brackets),

20” (50.8 cm) deep

Rack-mount brackets and
slides

Choice of rack-mount brackets with handles (

optional

) or without handles

Optional

rack-mount slides

Dual power supplies

460 watts each, auto-ranging (100–240 VAC)

Load-sharing N+1 redundant, hot-pluggable

Filtered, fuse-protected AC sockets

a—Slot 1 supports SCSI Zero-Channel RAID.

b—Slot 5 supports graphics.

c—The two on-board USB headers are brought out to the rear of the chassis above the I/O Panel (see

Figure 1-3

, page 1-3,

and

Figure 1-5

, page 1-10).

Those who wish to customize USB ports should contact a local Themis sales office or [email protected].

Table 1-1.

Major Features of the RES-32DCX (Continued)

Feature

Details

Summary of Contents for RES-32DCX



















































































































































Search results

Summary of Contents for RES-32DCX

Reviews:

Related manuals for RES-32DCX

Brands by name

Popular brands

Themis RES-32DCX, Installation Manual

Search results

Summary of Contents for RES-32DCX

Reviews:

Related manuals for RES-32DCX

Brands by name

Popular brands