Themis RES-32DCX, Installation Manual

Page: 67 / 146

RES-32DCX Installation Manual
2-18
Themis Computer
6. Loop the velcro strap back through the fourth slot down from the top on the
power-cord bracket. Pull tightly on the strap and fasten it to itself (see
F , Fig-
ure 2-13 ).
7. Using the bottom 4 slots on the power-cord bracket, repeat steps 3 through 6
to secure the lower AC power cord.
Figure 2-14 shows the two power cords secured in place on the rear of the RES-32DCX.
2.3.2 Turning the System On
1. Plug the AC power cord from each of the RES-32DCX power supplies into a
“live” AC outlet.
The LED on each power supply will turn on when AC power is enabled.
2. On the front of the RES-32DCX push the system power on/off button (see
Figure 2-15 ). This will cause the system
POWER
LED to light (green).
Figure 2-14. System Power Button and LED on the RES-32DCX Front
Figure 2-15. System Power Button and LED on the RES-32DCX Front
System Power
On/Off Button
Power LED