Themis RES-32DCX, Installation Manual

Page: 51 / 146

2-2
Themis Computer
RES-32DCX Installation Manual
1. Loosen the two captive Phillips screws holding the protective top access cover
to the rear of the RES-32DCX chassis (see
A , Figure 2-1 ).
2. Both the front and sides of the cover have flat hooks or tabs underneath that
fit under slots on the chassis top edges (see
B , Figure 2-1 ). Remove the cover
by sliding it toward the rear until it is free of these chassis slots.
3. Store the cover in a safe place until it is replaced.
Figure 2-1. Remove the RES-32DCX Protective Access Cover
Loosen the 2 captive access-cover screws . . .
A
B
Rear View
. . . and slide the top cover toward the rear until the top hooks and tabs clear all chassis slots
Chassis slot Chassis slot
Left-side top edge