Themis RES-32DCX, Installation Manual

Page: 63 / 146

RES-32DCX Installation Manual
2-14
Themis Computer
2.1.7 Lithium Battery
2.1.7.1 Removing the Lithium Battery
Perform the following steps to remove the lithium battery:
1. Make sure the system is powered off (see “Operation” on page 2-16).
2. Locate the lithium battery socket (see Figure 2-6 , page 2-9) and squeeze the
latch (see A , Figure 2-10 ) together until the battery lifts out of its socket.
3. Remove the old battery and replace with a new battery (see next section).
2.1.7.2 Installing a Lithium Battery
Perform the following steps to insert a new lithium battery:
1. Tilt the replacement battery into the empty socket so that it is angled under the
battery latch (see
B , Figure 2-10 ).
2. Carefully press down on the battery until it clicks firmly into place.
Figure 2-10. The RES-32DCX Lithium Battery and Socket
To release, squeeze battery latch together . . .
Battery
A B
Latch
. . . and remove battery from socket