Themis RES-32DCX, Installation Manual

Page: 125 / 146

D-8
Themis Computer
RES-32DCX Installation Manual
Mount Point : Enter the partition's mount point. For example, if this partition should
be the root partition, enter / ; enter /boot for the /boot partition, and so on. You can
also use the pull-down menu to choose the correct mount point for your partition.
File System Type : Using the pull-down menu, select the appropriate file system
type for this partition
Allowable Drives : This field contains a list of the hard disks installed on your sys-
tem. If a hard disk's box is highlighted, then a desired partition can be created on that
hard disk. If the box is
not checked, then the partition will never be created on that
hard disk. By using different checkbox settings, you can have Disk Druid place par-
titions where you need them, or let Disk Druid decide where partitions should go.
Size (MB) : Enter the size (in megabytes) of the partition. Note, this field starts with
100 MB; unless changed; only a 100 MB partition will be created.
Additional Size Options : Choose whether to keep this partition at a fixed size, to
allow it to “grow” (fill up the available hard drive space) to a certain point, or to
allow it to grow to fill any remaining hard drive space available.
If you choose Fill all space up to (MB) , you must give size constraints in the field to
the right of this option. This allows you to keep a certain amount of space free on
your hard drive for future use.
Force to be a primary partition : Select whether the partition you are creating
should be one of the first four partitions on the hard drive. If unselected, the partition
is created as a logical partition.
OK : Select OK once you are satisfied with the settings and wish to create the parti-
tion.
Cancel : Select Cancel if you do not want to create the partition.