Themis RES-32DCX, Installation Manual

Page: 97 / 146

RES-32DCX Installation Manual
C-18
Themis Computer
C.4.7.7 Base I/O Address
This setting allows you to select the base I/O address for serial port B. The options
are 3F8,
2F8 , 3E8 and 2E8.
C.4.7.8 Interrupt
This setting allows you to select the IRQ (interrupt request) for serial port B. The
options are
IRQ3 and IRQ4.
C.4.7.9 Parallel Port
This setting allows you to assign control of the parallel port. The options are
Enabled (user defined), Disabled and Auto (BIOS-or OS- controlled).
C.4.7.10Base I/O Address
Select the base I/O address for the parallel port. The options are 378 , 278 and 3BC.
C.4.7.11 Interrupt
This setting allows you to select the IRQ (interrupt request) for the parallel port. The
options are IRQ5 and
IRQ7 .
C.4.7.12Mode
This feature allows you to specify the parallel port mode. The options are Output
only, Bi-Directional, EPP and
ECP .
C.4.7.13DMA Channel
This item allows you to specify the DMA channel for the parallel port. The options
are DMA1 and
DMA3 .
C.4.7.14Floppy Disk Controller
This setting allows you to assign control of the floppy disk controller. The options
are
Enabled (user defined), Disabled, and Auto (BIOS and OS controlled).
C.4.7.15Base I/O Address
This setting allows you to select the base I/O address for the parallel port. The
options are
Primary and Secondary.