6
Maintenance
Assembling the Liquid Displacement Assembly
Thermo Scientific
Accela Pump Hardware Manual
73
5. Using a 4 mm L-hex wrench, tighten the compression lid as shown in
Figure 58
.
Figure 58.
Tightening the compression lid
Installing the Holding Hooks and the Piston Assemblies
Y
To install the holding hooks and piston assemblies
1. Slide each holding hook and piston unit into its designated slot (see
Figure 59
).
Figure 59.
Sliding the holding hook and piston assembly into the LDA body
Note
For instructions on assembling the holding hook and piston assembly, see
“Replacing the Primary Pistons Seals”
on
page 67
.
