LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14
Page 1429 of 1904
2022-03-04
Not Subject to NDA
7 : TLS_DHE_RSA_WITH_AES_256_CBC_SHA
8 : TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
9 : TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
10 : TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
<auth_mode> integer
0
authentication mode
Values:
0 : SSL Verify None
1 : manage server authentication
2 : manage server and client authentication if
requested by the remote server
<cert_format> integer
1
It selects the format of the certificate
to be stored via #SSLSECDATA
command
Values:
0 : DER format
1 : PEM format
it is supposed that the module is just powered on and the
AT#SSLSECCFG command is entered without
<cert_format> parameter, the default format is PEM. In this case
the AT#SSLSECCFG? read command doesn't return the setting of
the format in order to meet retro compatibility with other families.
Now, let's assume that AT#SSLSECCFG command is entered
again, but using the <cert_format> parameter for the first time: if
the read command is entered, it reports the parameter value just
used. If subsequently the <cert_format> is omitted, the
AT#SSLSECCFG? read command reports the parameter value
entered the last time.
Server CAcertificate has to be stored through AT#SSLSECDATA.
Summary of Contents for LE910C series
Page 1904: ......
