LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14
Page 381 of 1904
2022-03-04
Not Subject to NDA
3.4.6.
AT+CLIR - Calling Line Identification Restriction
The command manages the CLIR service.
3GPP TS 27.007
3GPP TS 22.081
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Specific profile
No
-
2
AT+CLIR=[<n>]
Set command overrides the CLIR subscription when temporary mode is
provisioned as a default adjustment for all following outgoing calls. This
adjustment can be revoked by using the opposite command. This
command refers to CLIR service (see 3GPP TS 22.081), that allows a
calling subscriber to enable or disable the presentation of the Calling Line
Identification (CLI, i.e., the phone number of the caller) to the called party
when originating a call.
This command sets the default behavior of the device in all outgoing calls.
Parameter:
Name
Type
Default
Description
<n>
integer
0
setting of CLIR service
Values:
0 : CLIR facility according to CLIR service network status
1 : CLIR facility active (CLI not sent)
2 : CLIR facility not active (CLI sent)
Summary of Contents for LE910C series
Page 1904: ......
