LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14
Page 210 of 1904
2022-03-04
Not Subject to NDA
3.2.2.57.
AT#PORTCFG - Connect Physical Ports to Service Access Points
This command allows to connect Service Access Points (software anchorage points) to
the external physical ports.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#PORTCFG=<Variant>
Set command allows to connect Service Access Points to the external
physical ports giving a great flexibility. Examples of Service Access Points:
AT Parser Instance #1, #2, #3, etc...
Parameter:
Name
Type
Default
Description
<Variant> integer
14
set port configuration. A short description,
for each <Variant> value, is reported in
test command section. The range depends
on the product.
Value:
0÷max : see test command section
To enable the set port configuration, the module must be rebooted.
In LE910C1-SV/ST/SA/EUX/SAX/SVX and LE910Cx-WWX, the
Variant 16 is not supported.
The default value of parameter <Variant> is 16 in LE910C1-
EU/NF/LA (4G+2G).
Variant 17 is supported for only LE910C1-EUX/SAX/SVX and
LE910Cx-WWX.
Summary of Contents for LE910C series
Page 1904: ......
