Teledyne T360, Operation Manual, Page: 291 / 358

Teledyne API - T360/T360M, 360E/360EM Appendix A Menu Trees (05233C DCN6552)
A-13
Setup Variable Numeric
Units
Default
Value
Value Range Description
O2_FILT_DELTA
14
% 2 0.1–100 Absolute change in O
2
concentration to shorten filter.
O2_FILT_PCT
14
% 2 0.1–100 Relative change in O
2
concentration to shorten filter.
O2_FILT_DELAY
14
Seconds 20 0–300 Delay before leaving O
2
adaptive
filter mode.
O2_DIL_FACTOR
14
— 1 0.1–1000 Dilution factor for O
2
. Used only if
is dilution enabled with
FACTORY_OPT variable.
PPB,
PPM,
UGM,
MGM
%
4, 5, 9, 18
USER_UNITS — PPM
0
PPM
3, 8
MGM
3, 8
Concentration units for user
interface.
NEG_CONC_SUPPRESS — OFF,
ON
17
OFF, ON
ON pegs negative concentrations
at zero; OFF permits negative
concentrations
DIL_FACTOR — 1 0.1–1000 Dilution factor. Used only if is
dilution enabled with
FACTORY_OPT variable.
DARK_CAL_DURATION Seconds 180,
60
4
10–600 Duration of dark cal. First two-
thirds is stabilization period; final
third is measure period.
DARK_MEAS_MV mV 0 -1000–1000 Dark offset for measure reading.
DARK_REF_MV mV 0 -1000–1000 Dark offset for reference reading.
CO2_COMP_ENABLE — OFF ON, OFF ON enables CO
2
compensation;
OFF disables it.
CO2_COMP_CONC % 0 0–20 CO
2
concentration to
compensate for.
SOURCE_DRIFT_ENAB
21
— OFF ON, OFF ON enables source drift
compensation; OFF disables it.
SOURCE_DRIFT
21
PPB/Day 0 -500–500
Source drift compensation rate of
change.
CO_CONST1 — 8000,
500
15,20,22,23
78.8
9,12
3020
18
500
4,9,12
39600
8
40000
3
100–50000 CO calculation constant.
07272B DCN6552