Teledyne T360, Operation Manual, Page: 105 / 358

Teledyne API Model T360/T360M Operation Manual Operating Instructions
103
4.9. SETUP  PASS: PASSWORD FEATURE
The T360 provides password protection of the calibration and setup functions to
prevent unauthorized adjustments. When the passwords have been enabled in the
PASS menu item, the system will prompt the user for a password anytime a
password-protected function (e.g., SETUP) is selected. This allows normal
operation of the instrument, but requires the password (101) to access to the
menus under SETUP. When PASSWORD is disabled (SETUP>OFF), any
operator can enter the Primary Setup (SETUP) and Secondary Setup
(SETUP>MORE) menus. Whether PASSWORD is enabled or disabled, a
password (default 818) is required to enter the VARS or DIAG menus in the
SETUP>MORE menu.
There are three levels of password protection, which correspond to operator,
maintenance, and configuration functions. Each level allows access to all of the
functions in the previous level.
Table 6-9: Password Levels
Password Level Menu Access Allowed
Null (000) Operation
All functions of the MAIN menu: TEST, GEN, initiate
SEQ , MSG, CLR
101 Configuration/Mainte
nance
Access to Primary Setup and Secondary SETUP
Menus when PASSWORD is enabled.
818 Configuration/Mainte
nance
Access to Secondary SETUP Submenus VARS and
DIAG whether PASSWORD is enabled or disabled.
To enable or disable passwords, press the following menu button sequence:
07272B DCN6552