manualshive.com logo in svg

Teledyne 3700, Installation And Operation Manual

The Hitachi 3700 Installation Instructions Manual is a comprehensive guide that provides step-by-step instructions for setting up and using the Hitachi 3700 product. This user-friendly manual is available for free download from manualshive.com, ensuring easy access to all necessary information for a smooth installation process.

Share
Download
background image

3700 Portable Samplers

Appendix D  Display Index

D-9

Enable Pin configure option. Select “YES” to turn the Master/slave mode on. Select “NO” to turn the Master/Slave 
mode off.

Display 320

MASTER/SLAVE MODE?

[YES, NO]

Enable Pin configure option. Select “YES” to take a sample at the time the sampler becomes disabled. Select “NO” if 
you do not want a sample event when the sampler becomes disabled.

Display 321

SAMPLE UPON DISABLE?

[YES, NO]

Enable Pin configure option. Select “YES” to take a sample when the sampler becomes enabled; 

i.e.,

 ceases to 

receive an inhibit signal from a flow meter or a Liquid Level Actuator. Note: No sample will be taken if the enable sig-
nal is used to initiate the start-time delay countdown. Select “NO” if you do not want a sample event when the sampler 
becomes enabled.

Display 322

SAMPLE UPON ENABLE?

[YES, NO]

Enable Pin configure option. Select “YES” to restart the sample interval countdown at the time the sampler is 
enabled. The interval countdown is determined by the setting if “NO” is selected in Display #324.

Display 323

RESET SAMPLE

INTERVAL? [YES, NO]

Enable Pin configure option. This display appears if you select “NO” in Display #323. Select “YES” to freeze the sam-
ple interval when the sampler becomes disabled. When the sampler is enabled, the interval countdown continues 
from the point where it had stopped. Select “NO” to let the sample interval countdown continue while the sampler is 
disabled.

Display 324

INHIBIT COUNTDOWN?

[YES, NO]

Event Mark configure option. Select “CONTINUOUS SIGNAL” to send a variable-duration event mark signal from pin 
E of the flow meter connector. Select “PULSE” to send a 3-second event mark signal.

Display 330

[CONTINUOUS SIGNAL,

PULSE]

Event Mark configure option. This setting appears when you select “CONTINUOUS SIGNAL” in Display #330. Select 
“PUMP CYCLE” to transmit the event mark signal during the entire pump cycle, including any programmed rinses and 
retries. Select “FWD PUMPING ONLY” to send the signal when the pump is delivering a sample volume only.

Display 331

DURING [PUMP CYCLE,

FWD PUMPING ONLY]

Event Mark configure option. This setting appears when you select “PULSE” in Display #330. Select “PURGE” to 
transmit an event mark signal to a flow meter at the beginning of the pre-sample purge. Select “FWD PUMPING” to 
transmit a signal when the pump switches forward to deliver the sample volume.

Display 332

AT THE BEGINNING OF

[PURGE, FWD PUMPING]

Purge Counts configure option. Enter the number of pre-sample pump counts needed to purge the suction line. This 
value is set to 150 when the controller is reinitialized.

Display 340

--- PRE-SAMPLE

COUNTS (0 - 9999)

Purge Counts configure option. Enter the number of post-sample pump counts needed to purge the suction line. The 
Controller derives the number that initially appears in this display from the suction line ID and length entered in Dis-
play #230 and #232.

Display 341

--- POST-SAMPLE

COUNTS (0 - 9999)

Table D-1 Display Index (Continued)

Summary of Contents for 3700



















































































































































































































































Reviews:

No comments

Related manuals for 3700

Gardol GLVE 1400-34 Original Operating Instructions preview
GLVE 1400-34
Brand: Gardol Pages: 260
York Fitness 60091 Owner'S Manual preview
60091
Brand: York Fitness Pages: 20
Halyard MIC-KEY Instructions For Use Manual preview
MIC-KEY
Brand: Halyard Pages: 88
HALDER EH 2B353 Short Instruction Manual preview
EH 2B353
Brand: HALDER Pages: 2
ValueStore US V16 Quick Manual preview
V16
Brand: ValueStore US Pages: 2
Velleman HQ Power VDL25BM Quick Start Manual preview
HQ Power VDL25BM
Brand: Velleman Pages: 3
iGuzzini Whisper Manual preview
Whisper
Brand: iGuzzini Pages: 36
Waterous AQUIS ULTRAFLOW Installation And Operation Manual preview
AQUIS ULTRAFLOW
Brand: Waterous Pages: 56
mychway MS-7206F User Manual preview
MS-7206F
Brand: mychway Pages: 56
ABB PT004165 Operation Manual preview
PT004165
Brand: ABB Pages: 106
Nakayama ES7250 Manual preview
ES7250
Brand: Nakayama Pages: 19
Scilogex DM 0412 User Manual preview
DM 0412
Brand: Scilogex Pages: 21
Enerpac SGM Series Instruction Sheet preview
SGM Series
Brand: Enerpac Pages: 12
Master MS Seeds Instructions For Use And Maintenance Manual preview
MS Seeds
Brand: Master Pages: 24
SaMASZ FISHER Operator'S Manual preview
FISHER
Brand: SaMASZ Pages: 28
K-SPORT X-MAX KSH011 Assembly Instruction Manual preview
X-MAX KSH011
Brand: K-SPORT Pages: 6
AvonSynth AVS-LFO-2 User Manual preview
AVS-LFO-2
Brand: AvonSynth Pages: 3
AP&T AP-AB1205 Instructions Manual preview
AP-AB1205
Brand: AP&T Pages: 15

Brands by name

Popular brands

Load more brands