Teledyne 3700, Installation And Operation Manual

Page: 72 / 242

3700 Portable Samplers
Section 3 Programming Guidelines
3-38
3.9 Configure Sequence
The configure sequence provides a number of setup options.
Some options enable sampling features, some provide reference
data, and others affect run-state operations.
Example Checking the Configure Option Settings shows the pro-
cedure used to access the configure sequence. (When you see a
“SELECT OPTION: (
← →)
” display, you are in the configure
sequence.) Each option uses at least two displays. The first
display lists the option name. The second and any additional dis-
plays are input displays. To access an input display, press the
ENTER
/
PROGRAM
key while the desired option name is displayed.
Once you’ve accessed the input display, use the keypad to enter
numbers and make choices.
Pressing the
EXIT PROGRAM
key in the configure option list will
return the sampler to standby. Pressing the
EXIT PROGRAM
key in
a configure option input display will return you to the list of con-
figure options without changing the display’s setting.
By pressing the
L E F T A R R O W
or
R I G H T A R R O W
key at the
“SELECT OPTION” display in the configure sequence, you can
scroll through the list of configure options without viewing each
input display. If you are interested in only one or two options, you
can use this method to locate the option of interest quickly.
Each option is discussed below in the order in which it appears
when configuring the sampler. Individual input displays and
their settings, are discussed separately within the discussion of
each option. The name of the setting is placed at the left of each
option so you can identify each topic. Each discussion does not
include illustrations of displays; however, discussions do include
display numbers, which are identified in Appendix D.
3.9.1 Set Clock Use this option to synchronize the sampler’s clock with real time.
You must make entries using military time: 9:30 a.m. would be
entered as 9:30, 9:30 p.m. would be entered as 21:30, etc. When
the sampler accepts a year entry, the seconds will be reset to
zero. (
Display #210 )
3.9.2 Bottles and Sizes You can use the Bottles and Sizes option to enter the number of
bottles and the bottle volume. The option uses four input dis-
plays:
• The first display specifies a Portable or Refrigerated
Sampler.
Other program sequence displays.
↓
↓
8. The sampler returns to standby. Press the
START SAMPLING
key to run the program.
. . . STANDBY . . .
9:39:50 19-JUN-04
Example: Calibration (Continued)