Teledyne 3700, Installation And Operation Manual

Page: 212 / 242

3700 Portable Samplers
Appendix D Display Index
D-2
This display appears only in the extended programming mode and follows Display #10 when you have selected
“TIME.” Select “UNIFORM” for uniform time intervals, “NONUNIFORM” for nonuniform time intervals.
Display11 [UNIFORM, NONUNIFORM]
TIME INTERVALS
This display appears after you select “PROGRAM” in Display #1. It appears only when the sampler is configured for
the extended programming mode and for 4, 12, or 24 bottles with the 3700 Portable, and 12 or 24 bottles with the
3700 Compact. Select “TIME” for time-paced sampling. Select “FLOW” for flow-paced sampling, and “STORM” for
storm sampling.
Display 12
[TIME, FLOW, STORM]
PACED SAMPLING
This display appears after you select “STORM” in Display #12. Use to select time- or flow-pacing for the second bottle
group of a storm routine. Select “TIME” for time-pacing or “FLOW” for flow-pacing
Display14 [TIME, FLOW]
SECOND BOTTLE GROUP
This display appears after you select “STORM” in Display #12. Enter the amount of time between the sampler’s
enabling and the first sample event for the first bottle group occurs.
Display 15
___ MINUTE DELAY TO
FIRST GROUP SAMPLE
This display is the first input display of the flow segment of a storm program. Select “DURING” to collect samples for
the first and second bottle groups concurrently. Select “AFTER” to collect samples for the second bottle group after
the sampler has filled the first bottle group.
Display 16
[DURING, AFTER]
FIRST GROUP
This display appears after you select “STORM” in Display #12. Enter the amount of time between the time the sam-
pler is enabled and the first sample event for the second bottle group.
Display 17
___ MINUTE DELAY TO
SECOND GROUP SAMPLE
This display follows Display #11 when you have selected “NONUNIFORM.” Select “YES” to modify the existing non-
uniform intervals. Select “NO” to leave the nonuniform intervals unchanged.
Display 20
MODIFY SEQUENCE?
[YES, NO]
In the basic programming mode, this display appears after you have selected “TIME” in Display #10. In the extended
programming mode, this display appears when you have selected “UNIFORM” in Display #11. Enter the uniform time
interval. You need to make 2 entries: The first entry sets the hours, the second sets the minutes.
Display 21
SAMPLE EVERY
-- HOURS -- MINUTES
This display follows Display #10 when you have selected “FLOW.” Enter the flow-pulse interval.
Display 22
SAMPLE EVERY
---- PULSES (1 - 9999)
This display follows Display #15. Use this display to enter the number of timed sample events in a storm program.
Display 23
TAKE -- TIMED
SAMPLE EVENTS (1 - MAX)
This display follows Display #23. Enter the time interval between time-paced sample events in a storm program.
Display 24
SAMPLE INTERVALS OF
-- MINUTES (1 - 99)
Table D-1 Display Index (Continued)