Teledyne 3700, Installation And Operation Manual

Page: 66 / 242

3700 Portable Samplers
Section 3 Programming Guidelines
3-32
Example: Flow-Paced Multiplexed (bottles-per-sample) Sampling
1. Press
ENTER
/
PROGRAM
to access the interactive state.
. . . STANDBY . . .
10:34:50 19-JUN-04
2. Access the program sequence by selecting “PROGRAM.”
[
PROGRAM
, CONFIGURE]
SAMPLER
3. Select “FLOW.”
[TIME,
FLOW
]
PACED SAMPLING
4. Enter “10” as the flow--pulse interval. The sampler will take a sample every tenth flow pulse received.
SAMPLE EVERY
10 PULSES (1-9999)
5. Select “YES” to multiplex samples.
MULTIPLEX SAMPLES?
[
YES
, NO]
6. Select “BOTTLES PER SAMPLE.”
[
BOTTLES PER SAMPLE
,
SAMPLES PER BOTTLE]
7. Enter the number of bottles per sample event: “2.”
2 BOTTLES PER
SAMPLE EVENT (1-24)
8. Enter “500” to set the sample volume at 500 ml.
SAMPLE VOLUMES OF
500 ml (10 - 1000)
9. Select “YES.”
ENTER START TIME?
[
YES
, NO]
Enter the start time for the sampling routine. Note that the sampler may receive flow pulses before the sampling rou-
tine begins. Any pulses received before the start time will be disregarded.
START FLOW COUNT AT
5 :00 20-06 JUN
After this message appears briefly, the sampler automatically returns to the standby state.
PROGRAMMING SEQUENCE
COMPLETE
Press the
START SAMPLING
key to run the program.
. . . STANDBY . . .
10:37:23 19-JUN-04
To start the sampling routine with the first bottle, accept the blinking “1” by pressing the
ENTER
/
PROGRAM
key. If you
want to start the routine with another bottle, enter the starting bottle number.
START SAMPLING
AT BOTTLE 1
(1-23)
This display appears after you press the
START SAMPLING
key to start the routine. It reports the scheduled start time
on the first line. The second line reports the current time and date.