Teledyne 3700, Installation And Operation Manual

Page: 62 / 242

3700 Portable Samplers
Section 3 Programming Guidelines
3-28
Example: Flow-Paced Sequential Sampling
1. Press
ENTER
/
PROGRAM
to access the interactive state
. . . STANDBY . . .
10:34:50 19-JUN-04
2. Access the program sequence by selecting “PROGRAM.”
[
PROGRAM
, CONFIGURE]
SAMPLER
3. Select ‘FLOW’.
[TIME,
FLOW
]
PACED SAMPLING
4. Enter “5” as the flow pulse interval. The sampler will take a sample every fifth flow pulse received.
SAMPLE EVERY
5 PULSES (1-9999)
5. Select “NO.”
MULTIPLEX SAMPLES?
[YES,
NO
]
6. Enter “500” to set the sample volume at 500 ml.
SAMPLE VOLUMES OF
500 ml (10 - 1000)
7. Select “NO.”
ENTER START TIME?
[YES,
NO
]
After this message displays briefly, the sampler automatically returns to the standby state.
PROGRAMMING SEQUENCE
COMPLETE
8. After you properly install the sampler, press the
START SAMPLING
key to run the program.
. . . STANDBY . . .
10:37:23 19-JUN-04
9. To start the sampling routine with the first bottle, press the
ENTER
/
PROGRAM
key. To start the routine with another
bottle, enter the starting bottle number here.
START SAMPLING
AT BOTTLE 1 (1-24)
The first line of this display indicates the start time. The second line reports the current time and date.
START AT 10:38 19-JUN
10:37:26 19-JUN
This display indicates the bottle that will receive a sample at the next sample event. The second line indicates the
number of pulses remaining in the sample.
BOTTLE 1
AFTER 5 PULSES
This display shows that one flow pulse has been received. The pulse countdown continues until the sample event
concludes.
BOTTLE 1
AFTER 4 PULSES
↓
↓